Engineering & Tech Ecosystem About US Contact Us

Case Studies

On this page you can have impressions from genuine Case Studies

 

These are success stories that we at Krashin-Shalev are proud of.

You can learn how our heat exchangers have been implemented in Client facilities and created a new and better business reality for our Clients.

Case Studies are a great way to get a glimpse of our practices and dedication to every project we receive.

Case Study # 1

Case Study # 1

One of the advantages of asymmetric heat transfer plates made by TRANTER, which we use, among other things, to produce "deep" heat exchangers with a net average free passage of 3.3mm, as opposed to 2-2.5mm in competitors' plates. We, like most serious manufacturers in the world, have two series of models - 3-4mm "deep" plates for free flow of polluted flows - and "shallow" plates - 2.5mm or less free passage, suitable for closed and clean circuits. Although this can be proved by physical formulas, it does not take a genius engineer to understand that plates with a wider free passage will be less clogged than plates with narrow passages ...
Case Study # 2

Case Study # 2

A major and important security plant contacted us to upgrade an existing American-made heat exchanger whose job is to cool an industrial process with polluted cooling water. First, we conducted a thermodynamic research in the plant that encompassed all the requirements and outputs parameters necessary for the plant in the production process and discovered that a heat exchange system that meets these thermodynamic parameters should be much smaller than the huge system that was then operating in the plant ...
Case Study # 3

Case Study # 3

When we only considered getting into plate heat exchangers more than 30 years ago, insiders told us: "Great! It's like the printer business! You sell a heat exchanger cheaply, a few years later it starts to leak and clog and so you’ll endlessly sell maintenance and spare parts." This business conduct has never been in part of our DNA. After we have hired an international knowledge company for the purpose of building our production lines, it became clear that an in a high quality heat exchanger, when the design is right and suitable for the application, the production process is meticulous and at the highest quality and the choice of metals and materials is well informed and responsible, leaks and clogging are not inevitable ...
On the Client Stories page, we’ll tell about successful cases where our products have been implemented on the ground and created a new and better business reality for our Clients ...
Skip to content For a competitive quote
For a competitive quoteFill in your details on the form: